← All posts

TikTok LIVE audio interface: set it up in 5 steps

An audio interface reaches TikTok LIVE Studio as a microphone: Windows sees it as an input, and you add it in LIVE Studio’s Audio mixer under Microphones. The problem to expect with an interface is a voice stuck on one side, and step 4 covers it.

These steps are for LIVE Studio on a Windows PC, as of November 2026. Work through them in order, because each one depends on the one before.

1. Get the mic into the interface

Connect the mic to the interface with an XLR cable, then connect the interface to your PC over USB.

Condenser mics need 48V phantom power, which the interface sends down the XLR cable. Turn it on for those. If you’ve got a dynamic mic, check its manual before you switch 48V on.

Then set the gain on the interface while talking at your stream volume. Dynamic mics can need a lot of it: Elgato’s pitch for the 80 dB on its Wave XLR MK.2 is that it’s plenty for a Shure SM7B. Do your boosting here rather than in software, which is the same advice OBS forum regulars give to avoid distortion.

2. Make sure Windows sees it

Go to Start > Settings > System > Sound. Under Input, find your interface in Choose a device for speaking or recording. Select the arrow beside it and use Start test under Microphone test.

If the test picks up your voice, Windows is done. If it doesn’t, check two things:

  • Permissions: Go to Privacy & security > Microphone and turn on Microphone access and Let desktop apps access your microphone. Microsoft says desktop apps don’t appear in the per-app list, so don’t go hunting for LIVE Studio there.
  • Drivers: If the interface isn’t listed at all, right-click Start, open Device Manager, expand Sound, video and game controllers, right-click the audio device and choose Update driver.

3. Add it in LIVE Studio

Plugging it in doesn’t put it on your stream. You have to add it:

  1. Open the Audio mixer from the control bar.
  2. In the Microphones section, click Add.
  3. Pick your interface from the Microphone device drop-down.
  4. Click Add to confirm.

Keep it to one mic. More than one added is the first thing TikTok lists for echo, and a webcam mic left on is an easy way to get there. My echo post has the rest of that list.

If you unplug the interface later, TikTok’s FAQ says to reconnect it and add it again.

4. Fix a voice stuck on one side

This is where an interface differs from a plain USB mic. Many interfaces are stereo, so a mic in input 1 can sit on the left channel only. OBS forum threads describe exactly this with interfaces, and viewers with headphones get your voice in one ear. They didn’t ask for that.

In LIVE Studio, turn on Convert to mono in that mic’s settings in the Audio mixer. TikTok describes it as recording in mono when a mic has multiple channels.

Watch your level afterwards. In OBS, the equivalent option averages the channels, so a mic on one channel gets quieter once it’s spread across two. I couldn’t confirm LIVE Studio’s version works the same way. If you do drop in volume, raise the gain on the interface first.

5. Test it, then check you’re not monitoring twice

Click the settings button for your mic, select General settings, turn on Audio monitoring and save. Back in the Audio mixer, click Test audio and talk. You should hear your voice through your headset. Click Testing.. to stop.

Set the mic’s volume during this test. TikTok’s target is clear and not distorted.

Many interfaces also have a headphone jack that plays your voice directly. The Wave XLR’s is built for zero-latency monitoring, with wired headphones. If you listen that way, LIVE Studio’s Audio monitoring gives you a second copy of your own voice on top. Use it for the test, then turn it back off.

Still nothing?

Viewers can’t hear you. Open the Audio mixer and confirm the right device is selected and the volume isn’t too low. That’s TikTok’s first check for a muted voice.

Echo. TikTok’s echo article treats this as a sound card setup and splits it by speakers. For one speaker, it says to try disabling internal playback, but it doesn’t say where that setting is and I couldn’t confirm it for any specific interface. For several speakers, go to Audio mixer > Advanced Settings > Speaker for co-hosting creators to send other creators’ audio to a different speaker. If that doesn’t clear it, TikTok points you to the sound card’s maker.

You use a routing app. Some interfaces come with one. Elgato’s Wave Link runs up to five independent mixes, each with its own routing. If you use that kind of app, check that what you picked in Microphone device is actually carrying your voice. Elgato’s page doesn’t give steps specific to LIVE Studio, so Test audio is your proof.

Your voice sounds over-processed. Elgato says its mic processing reaches every app. If your interface software already cleans up your voice, try LIVE Studio’s noise suppression off and on during a test, then keep whichever sounds better. You’ll find it under Settings in the Microphones section of the Audio mixer.

Your voice lags the video. Each mic has an Audio offset setting for this. Elgato also notes VST effects may add latency, so try without them if you’ve got any loaded. My audio delay post has the full order.

Your PC is near the minimum spec. TikTok’s FAQ advises against extra plugins or audio software on its minimum tier (Core i3 9th Gen or Ryzen 5 3000-series, 8 GB RAM). The warning names the software, not the interface itself. The tier it names for professional equipment and audio software is Advanced: Core i7 12th Gen or Ryzen 5 7000-series, RTX 30-series or RX 6000-series, 16 GB RAM.

You want ASIO. The TikTok help pages I read don’t mention it, so I couldn’t confirm LIVE Studio supports it. Plan on using the interface as a normal Windows input.

You’re going live from a phone. I couldn’t confirm official steps for connecting an interface to the TikTok app, so I’ve left that out. Everything above is for LIVE Studio on a computer.

For the rest of LIVE Studio’s audio options, see the audio settings post.