All of TikTok LIVE Studio’s audio settings are in the audio mixer. You open it with the audio mixer button in the control bar at the bottom of the middle panel. Start with your microphone, then choose which computer sound goes out, then test with audio monitoring before you go live. If something sounds wrong on stream, the fix is nearly always in one of the six places below. Check them in order.
The menu names here match TikTok’s LIVE Studio help center as of October 2026. TikTok updates the app often. If a label has moved, look in the same panel.
1. Add one microphone, the right one
Plugging a mic into your PC doesn’t put it in your LIVE. You have to add it in the mixer.
- Connect the microphone with a cable.
- Click the audio mixer button in the control bar.
- In the Microphones section, click Add.
- Pick your mic from the Microphone device drop-down.
- Set the options in step 2 below, then click Add.
Add one microphone, not two. Having more than one mic added is the first cause on TikTok’s own echo list. The usual way it happens is a webcam mic and a USB mic both switched on.
2. Set the four microphone options
These options show up when you add the mic. You can change them later in that mic’s settings.
- Volume: set it to a comfortable level now and fine-tune it after the test in step 5.
- Noise suppression: reduces background noise like fan hum and typing. TikTok’s FAQ says you can adjust how strong it is. It also says to move the mic away from your PC fans and keyboard, which costs nothing.
- Convert to mono: turn this on if your microphone or audio interface has more than one channel. It makes LIVE Studio always record your voice in mono. If your voice reaches viewers lopsided or thin, check this first.
- Audio offset: lines up your audio with your video. Use it if your lips and your voice don’t match on camera.
There’s also a mute shortcut. Clicking the mic icon mutes or unmutes all your microphones at once. Remember that before you spend twenty minutes hunting for a fault that’s really one click.
3. Choose which computer sound goes out
You probably don’t want every sound on your PC on stream. TikTok’s FAQ gives the fix:
- Open the audio mixer.
- Click Settings under Audio.
- Select the application you want to capture audio from.
TikTok says other sounds are then muted automatically. Pick your game or music player, and your notifications and other apps stay off the stream.
4. Capture card: pick the right output mode
If you stream a console through a capture card, the capture card source has its own audio settings. Most “viewers hear the game but I don’t” problems start here.
First, check the audio signal. Select the audio input connected to your capture card. If it’s set to Don’t capture, nobody hears the game.
Then pick one of three output modes:
- Capture audio only: only your viewers hear the game. You don’t.
- Output audio (DirectSound): the game goes to your LIVE and to your speakers, so you and your viewers both hear it.
- Output audio (WaveOut): same result, but it uses WaveOut to send the sound to your speakers instead of DirectSound.
If you can’t hear your own game, switch from Capture audio only to one of the Output audio modes. TikTok’s help doesn’t recommend DirectSound over WaveOut, and I couldn’t confirm that either one is better. If one gives you trouble, try the other.
The same source also has an Audio parameter setting for bit width and sampling rate. Leave it alone unless you know your capture card needs a specific value.
5. Test before you go live
LIVE Studio lets you hear yourself the way viewers will. Put on headphones first. Monitoring through speakers sends your voice straight back into the mic.
- Click the audio mixer button in the control bar.
- Click the settings button on your microphone and select General settings.
- Switch on Audio monitoring and save.
- Click Test audio in the mixer and talk.
- Click Testing… when you’re done.
This is where you set the volume from step 2. Talk the way you do on stream, not the way you talk to a mic check.
6. Fix echo
This is TikTok’s echo checklist, in a sensible order:
- Make sure only one microphone is added in the mixer.
- Turn on echo cancellation in your microphone settings.
- Use headphones instead of speakers. An open mic next to speakers works like a hall of mirrors.
- If you’re gaming, turn off in-game voice chat.
If you use a sound card, TikTok splits the fix by speaker setup:
- One speaker: try turning off internal playback.
- More than one speaker: go to Audio mixer > Advanced Settings > Speaker for co-hosting creators. Send the other creators’ audio to a different speaker.
If it still echoes after that, TikTok says to contact your sound card maker.
Still nothing?
If your voice or your PC sound is missing completely, open the mixer and confirm the correct device is selected and its volume isn’t at zero. Then check the cable. A mic that came unplugged won’t come back by itself.
If the mic shows up but nothing gets through, Windows may be blocking it. Go to Start > Settings > Privacy & security, then Microphone under App permissions. Turn on Microphone access, Let apps access your microphone, and Let desktop apps access your microphone. LIVE Studio is a desktop program, and Windows doesn’t let you allow desktop programs one at a time, so that last switch is the one that matters.