← All posts

TikTok LIVE Studio on PS5 with an Elgato: the setup

The PS5 can’t stream to TikTok by itself, so a PC sits in the middle. The PS5 goes into the Elgato over HDMI, the Elgato goes into the PC over USB, and LIVE Studio picks it up as a Capture card source.

Most people who get stuck get stuck in one of three places: a black screen, game audio that’s missing or doubled, or a tiny 16:9 strip on a phone screen. Here’s the order that avoids all of them, as of October 2026.

1. Plug it in the right way round

Three cables, and the ports are labelled.

  • PS5 HDMI out goes into the Elgato’s HDMI In port.
  • A second HDMI cable runs from the Elgato’s HDMI Out to your TV or monitor. That’s the one you play on.
  • The Elgato’s USB cable goes into your PC.

Elgato’s setup guide says the HDMI Out connection lets you keep playing on your main screen with no added delay while the card captures in the background. It also says the 4K S wants a USB 3.0 port and the 4K X wants USB 3.2 Gen 2 for full performance. A slow USB port is a quiet way to lose frames, so use the right one.

2. Turn HDCP off on the PS5

This is the big one. HDCP is copy protection on the PS5’s HDMI signal, and with it on, the capture card gets nothing.

On the PS5, go to Settings > System > HDMI and turn off Enable HDCP.

Elgato calls a still-enabled HDCP the most common cause of “No Signal” on a PS5, and its 4K S quick start guide says plainly the card will show a black screen instead of your gameplay if you skip this. Elgato also says turning it off doesn’t affect gameplay.

3. Set the PS5 output resolution

Still on the PS5, go to Settings > Screen and Video > Video Output and set the resolution you want to capture. Elgato’s guide puts this step right after HDCP. Matching what the console sends to what your card and LIVE Studio expect saves you from chasing a signal problem later.

4. Add the Capture card source in LIVE Studio

In LIVE Studio, select your scene, click Add source, then Capture card. TikTok’s help center lists these settings:

  • Video device: pick your Elgato from the list.
  • Resolution and FPS: what your LIVE runs at. Higher FPS is smoother.
  • Video format: match what your card supports.
  • Color range: usually All.
  • Color space: for example 709 for standard HD.

If the Elgato isn’t in the Video device list, or it’s listed but black, go back to step 2 before touching anything else.

5. Pick the audio output mode on purpose

This is where the game ends up silent, or playing twice. In the same Capture card settings, LIVE Studio gives you Audio capture (choose the card’s audio, or Don’t capture) and an Audio output mode with three options:

  • Capture audio only: viewers hear the game. Your PC speakers don’t play it.
  • Output audio (DirectSound): viewers hear it, and so do your PC speakers.
  • Output audio (WaveOut): same as above, through a different Windows audio path.

Here’s the logic, since nobody spells it out. If you’re playing on a TV through the Elgato’s HDMI Out, you already hear the game from the TV. Pick Capture audio only and your viewers still get the sound, while you don’t get a second copy from the PC a fraction of a second behind. If you play by watching the LIVE Studio preview on your PC instead, pick one of the Output audio modes so you can hear it.

6. Decide what phone viewers see

Your PS5 picture is 16:9. Most people watching TikTok LIVE are holding a phone upright. LIVE Studio has two tools for that.

Screen adaptation sits in the top-right corner of LIVE Studio. For a landscape LIVE, it controls how portrait viewers see it: Original, 4:3 Crop, 1:1 Crop or Full screen. Cropping makes the picture bigger and cuts off both sides. For a portrait LIVE, you get Fit to Screen or Fill Screen, and TikTok’s own guide suggests Fit to Screen for gaming. That keeps the HUD and the minimap, at the cost of black bars.

If you use a stream key instead of going live straight from LIVE Studio, TikTok says this setting is finished on the Go LIVE web page instead.

Dual layout sends portrait and landscape at the same time. Right-click a scene, click Switch layout, then Dual layout. You build the portrait layout first and it syncs to landscape, where you can only resize and move things. Worth knowing before you click: converting a landscape scene drops its chatbox and ranking widgets, because portrait doesn’t support them.

Still nothing?

  • Black screen with HDCP off: check the setting actually saved, then make sure the cable from the PS5 is in HDMI In, not HDMI Out.
  • Picture but no sound on the LIVE: open the Capture card source again and check Audio capture isn’t set to Don’t capture.
  • Echo on your end: you’re hearing the TV and the PC. Switch to Capture audio only.
  • The game looks tiny on phones: that’s screen adaptation, step 6, not your capture card.